Astrostart 2514TX Fob Failure

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147854
Printed Date: May 09, 2025 at 10:51 AM

Topic: Astrostart 2514TX Fob Failure

Posted By: controlfreak
Subject: Astrostart 2514TX Fob Failure
Date Posted: January 17, 2024 at 3:37 PM

I keep having to replace my 2514 tx fobs after either low battery or if I just change batteries. After the battery change the remote wil just do the single slow beep and nothing I can do will change it. A new remote fob works fine until I have to change batteries. The remote unit works fine and I can always pair a new fob. Ideas please? Thanks

Replies:

Posted By: silvercivicsir
Date Posted: January 18, 2024 at 11:06 AM

you are putting in 2 X CR2016 batteries? and not a single CR2032?

Posted By: controlfreak
Date Posted: January 18, 2024 at 11:36 AM

Correct. I also measure the voltage of each new battery before I put them in.

Print Page | Close Window