Print Page | Close Window

Viper 5706 Auxilary Outputs

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147987
Printed Date: May 03, 2025 at 4:42 AM


Topic: Viper 5706 Auxilary Outputs

Posted By: nolig2278
Subject: Viper 5706 Auxilary Outputs
Date Posted: April 03, 2024 at 8:24 PM

I am trying to use one of my aux to trigger a factory relay for parking lights. The factory trigger is a ground and I was trying to use the latching setting of the viper aux but latching seems to have switched from pulse ground (default) to .5 volts + when I use the latching configuration. Does this make sense or is my viper wonky.    I was trying to avoid an extra relay (less wire mess) but if i need to then I will use an intermediate latching relay and the viper as a grnd pulse.

-------------
Mazda 6 and MX3


Print Page | Close Window