2008 Honda Civic, Compustar CM3000 Remote Start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=148210
Printed Date: May 02, 2025 at 1:39 PM

Topic: 2008 Honda Civic, Compustar CM3000 Remote Start

Posted By: tekin
Subject: 2008 Honda Civic, Compustar CM3000 Remote Start
Date Posted: November 14, 2024 at 7:08 PM

i have a 2008 civic auto

wanna use a old compustar cm3000 brain cause i like the range of the remote start and i have the 2 way remotes for it so, I wanna use that with a idatalink tb module.

can anyone help me with wiring this up and also do i need to computer flash the module or can I just do it in the car

Replies:

Posted By: tekin
Date Posted: November 14, 2024 at 7:17 PM

i have just never did a install with a bypass unit and the old cm3000 does not have a data port so that is where I am confused and do I need all the starter and ignition wires off the big harness of the cm3000

Posted By: lee.lopez
Date Posted: November 16, 2024 at 9:04 AM

You don't need a data port. Just wire the dashed lines in the Idatalink TB manual between the remote start and the bypass.

Yes, you will need to connect the remote start wires to the ignition harness as all the bypass does is bypass the immobilizer.

Print Page | Close Window