2016 Toyota Camry, Remote Start Error

Hi, I'm installing with Compustar CMX,T13 remote, and Blade module. All lock, unlock, alarm functions are working fine. Every time I remote start, the light on the Blade flash blue one, and solid red for 1 - 2s then turn off. Dashboard and odometer light turn on but car wouldn't start. It then turn everything off, try to start again, dashboard and odo are on again. It keeps doing that for I think 3 times then gives up.

Does that mean I have an "Incorrect Programming" error? (according to idatalink)

Your 2 way remote will give you a start error code.

A solid red on the Blade LED is "waiting for more vehicle information". You might try a factory reset and then reprogramming if that doesn't work.

There was no error shown on the remote. I swap out the brain and everything working now.

One more thing is how would you set the runtime on the OP500 to something like 10 minutes?

I believed we need an updated OP500 but not sure how to check if mine is already up to date?

Manual saying you need to select option 4 for Group 2-7 (for runtime 3-45 min). After choosing option 4, how do you specify the exact runtime?

Thank you

Keep scrolling and you will see after menu 4. It'll be in special features. Same thing if you choose to change defrost temperature.

Found it.
Thanks alot

One more question, when wiring table says "Left Front Window (Up/Down) (motor is part of module)", does that mean one touch window module not compatible?

I've never messed with one of those window modules, so I couldn't tell you.