Unlock, Lock Override Buttons With Compustar
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=148400
Printed Date: August 02, 2025 at 6:18 PM
Topic: Unlock, Lock Override Buttons With Compustar
Posted By: itskamel
Subject: Unlock, Lock Override Buttons With Compustar
Date Posted: July 27, 2025 at 3:56 PM
87 Caprice with door lock actuators that I added when I put in the Compustar.
I am using priority unlock so drivers door is isolated and everything works fine with just the remote.
Now I am adding unlock/lock buttons from inside the vehicle. The 3 doors Unlock fine with the Ground switched button. Now the problem comes I am blowing my door lock 15amp fuse when I use the remote. I have added a 2nd relay to handle the drivers door from the override button.
I hope this is making sense. Here is the diagram I used.
Short version, compustar w priority unlock blowing fuses after adding unlock/ lock buttons inside the car.
Seems the fuse blows when I hit the unlock from the remote now.
I am using priority unlock so drivers door is isolated and everything works fine with just the remote.
Now I am adding unlock/lock buttons from inside the vehicle. The 3 doors Unlock fine with the Ground switched button. Now the problem comes I am blowing my door lock 15amp fuse when I use the remote. I have added a 2nd relay to handle the drivers door from the override button.
I hope this is making sense. Here is the diagram I used.
Short version, compustar w priority unlock blowing fuses after adding unlock/ lock buttons inside the car.
Seems the fuse blows when I hit the unlock from the remote now.