Print Page | Close Window

LED Flasher for Viper 550

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14852
Printed Date: August 02, 2025 at 6:44 PM


Topic: LED Flasher for Viper 550

Posted By: Carbonman
Subject: LED Flasher for Viper 550
Date Posted: June 12, 2003 at 10:23 PM

Hey

I got a new/used/never installed viper 550 ASP alarm system, but when I open the box no LED flasher to be found.

Do I have to go to DEI for the replacement or can these be had from any alarm shop or make my own?? OR do I even need to install it?

thanks




Replies:

Posted By: caveman
Date Posted: June 12, 2003 at 11:17 PM

Any LED will work fine....as long as its a 2volt LED....which most are. You only need the connector that original LED had to plug into the alarm brain. All DEI dealers will have one around I'm sure. The plug is so small I dont recommend trying to solder the wires on the brain itself.

Steve



-------------
"Installing it yourself keeps my repair man busy"





Print Page | Close Window