Print Page | Close Window

2002 dodgge interpid

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14875
Printed Date: July 30, 2025 at 12:30 AM


Topic: 2002 dodgge interpid

Posted By: amador
Subject: 2002 dodgge interpid
Date Posted: June 13, 2003 at 3:43 AM

i need some help i am hooking up a alarm in a 2002 dodge interpid i need to know the proper way to hook up the door locks can someone please help thanks



Replies:

Posted By: Velocity Motors
Date Posted: June 13, 2003 at 8:23 AM

Click here : https://www.velocitymotorsport.com/install_notes/general.htm & look up the Positive Single Door Lock Diagram on the right hand side. Then use these wires from the Intrepid:

POWER LOCK|WHITE/ green         |*1 |back of fusebox            
|     POWER UNLOCK|same wire           |*1

*1 Locks are positive trigger through resistors. Use 2.7K (2700) ohms for lock and 620 ohms for unlock.



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: Chris Luongo
Date Posted: June 15, 2003 at 7:58 PM
Or if there is no factory Dodge alarm present, you can just tap into the three relays at the bottom of the fusebox. Test which pin of the relay is negative trigger, and tap right in there.


Print Page | Close Window