aladdin alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14931
Printed Date: July 21, 2025 at 1:13 PM

Topic: aladdin alarm

Posted By: dnatrance
Subject: aladdin alarm
Date Posted: June 14, 2003 at 3:40 AM

ok I have everything on p6 hooked up. I have the 12 volts on the pink wire, the siren hooked up, door locks work, blinkers work, door trigger... I have read some posts.. not sure if I have them hooked up right. I have them hooked to a GREEN/ red wire (I think) on the left of the fusebox. when you play with the dome light the doors will open and close.. someone told me I had to hook it to every door at the switch. This is on a 92 civic lx manual. When I take the key out (regardless of wether I touch the brake or not) the car stays on and there is no way to turn it off. if I press the e button the lights blink twice along with the siren. thats all I get. I can not arm the car at all, it does nothing. any suggestions? What other wires have to be hooked up for remote start? I have heard you have to hook up the emergency brake but where do I put it on the alarm? In valet mode though, the car turns off. Everything works besides that and the position of the dome light affects the door trigger.

Thanks

Replies:

Posted By: dnatrance
Date Posted: June 14, 2003 at 3:45 PM

Where is the emergency brake supposed to go on the aladdin alarm

Posted By: Velocity Motors
Date Posted: June 15, 2003 at 9:07 AM

Did you hook up the brake wire ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Velocity Motors
Date Posted: June 15, 2003 at 9:51 AM

It does not go anywhere. It is not a required connection to the system

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: dnatrance
Date Posted: June 15, 2003 at 1:26 PM

where would I hook it up and what would cause the car to stay running when you try to turn it off? it wont let me arm the system once I take the key out. It will stay running until you unplug the alarm

Posted By: dnatrance
Date Posted: June 15, 2003 at 1:27 PM

yes the brake wire is hooked up. I can go through the options in the alarm using the reciever and the brake works in there. Any other suggestions?