Channel Programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15064
Printed Date: September 15, 2025 at 8:06 PM

Topic: Channel Programming

Posted By: zhyion
Subject: Channel Programming
Date Posted: June 17, 2003 at 7:08 AM

Hello Everyone,

I need someone who owns a Prestige Alarm system (APS-510) to tell me how to program the channels. Meaning Step by Step would be greatly appreciated. I have 4 channels and two of them are hooked up to open my doors (driver and passenger). Without my remote programmed, I cannot open my door :( Oh yeah, I did not install this alarm system myself, and there is not a possibility for me to get a hold of the person that installed it! Or anything to get me started would also be appreciated.

Tnx' Zhyion posted_image

Replies:

Posted By: cpgoose
Date Posted: June 20, 2003 at 8:43 AM

I went to www.audiovox.com, and looked up your alarm.
There's a link there that has the owner's and installation manuals.

GO HERE

...then click the link that says "Find Manuals", and it will give you the link to your manuals. One of the manuals (probably the installation one) will show you how to clear your remote and reprogram it.

Posted By: zhyion
Date Posted: June 20, 2003 at 8:44 PM

Thanks I appreciate it! I got it working now...