APS-995C No response when programming?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15092
Printed Date: September 16, 2025 at 4:31 PM

Topic: APS-995C No response when programming?

Posted By: cherring69
Subject: APS-995C No response when programming?
Date Posted: June 18, 2003 at 6:53 AM

First off. Installer did a crappy job- placed antenna under kick panel drivers side door.

I don't believe he did any programming at all, and didn't bother to hook up the dome light feature, as it doesn't work. Also, what I'm believing to be the control switch wires (BLACK/ white, black) are cut off at the unit (wires are plugged in, but cut).

I've attempted to get into programming mode, however when I go thru the process (turn ignition on, press valet 3 times, turn ignition off, then back on) I'm not getting any chirps to confirm programming mode. It's not doing anything other than sitting there. Any ideas?

Thx

Chris

(mindgallery@yahoo.com)

Replies:

Posted By: cherring69
Date Posted: June 18, 2003 at 7:09 AM

One other thing- for the dome light, if the truck had keyless entry (with dome illumination) how do I wire the system so that the light comes on with disarm?

Thx!

Posted By: cherring69
Date Posted: June 18, 2003 at 7:15 AM

Wanted to clarify something on the no response when programming thing-

When I turn the ignition off (3rd step) I do get the chirps then- however when I turn the ignition back ON I'm not getting any chirps then- ie to confirm what options are enabled/disabled- even when pressing the valet switch to get to the different steps.

Posted By: cherring69
Date Posted: June 18, 2003 at 9:30 AM

Ah, one other thing I just noticed! I don't seem to be getting any 2 way communication to the LED remote- ie the indicators (puffs of smoke, lock/unlock icon, etc) never change.

I'm really starting to think I could've done a better job with the install just doing it myself...LOL.

Time to go back to CC and get them to fix it, I suppose. Now I know not to ever have them install anything again!

Chris