Print Page | Close Window

remote start on a 2003 ranger

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15117
Printed Date: September 16, 2025 at 11:08 AM


Topic: remote start on a 2003 ranger

Posted By: SoundImage
Subject: remote start on a 2003 ranger
Date Posted: June 18, 2003 at 2:30 PM

I've installed a hornet 554t on a 2003 ranger.  The ranger in a manual trans.  I need to bypass the clutch sensor but it has about 6 or 7 wires on it.  i found a wire that reads 5.50 ohms when the clutch is depressed.  after the vehicle starts it jumps to 56 ohms, then starts dropping slowly till it hits 18.1.  I need to know how to bypass this to start the truck.  Any info is appreciated.



Replies:

Posted By: Velocity Motors
Date Posted: June 18, 2003 at 2:43 PM

Here is how you test for the clutch wire:



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: SoundImage
Date Posted: June 18, 2003 at 3:09 PM
If i apply a negative to the wire the truck still won't start i think it needs to see 5.50 ohms to start.


Print Page | Close Window