98 vett
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15226
Printed Date: July 24, 2025 at 10:07 AM
Topic: 98 vett
Posted By: SoundImage
Subject: 98 vett
Date Posted: June 20, 2003 at 11:04 PM
anyone ever have a problem with a 98 vet. i'm installing a remote starter but theres a problem with the starter wire. if i apply 12 volts directly to the wire the starter doesn't crank. i'm posative i have the correct wire cause when i pull out the relay it wont start. I'm thinbking maybe ther's nother wire that needs to be energized to start. the vatts system is bypassed. anyone have any ideas. I've been through 2 techs and nobody can figure it out. ANY HELP IS APPRECIATED
Replies:
Posted By: Velocity Motors
Date Posted: June 21, 2003 at 8:28 AM
What wire did you test ? It should be the traditional YELLOW wire at the IGNITION harness. Also, Yellow/black at the BCM may be used for starter interrupt. This wire will show negative when the key is in the ignition, and will not allow the car to start when cut. Do NOT use for remote start.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: SoundImage
Date Posted: June 21, 2003 at 6:43 PM
yup good old yellow is the one, didn't do anything with yel/black.
|