clifford omni sensor-plug n play??

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15236
Printed Date: July 26, 2025 at 5:35 AM

Topic: clifford omni sensor-plug n play??

Posted By: steveo29
Subject: clifford omni sensor-plug n play??
Date Posted: June 21, 2003 at 6:08 AM

i have a uk version concept 600...if i purchase a omni sensor is it plug n play..if no how easy is the install?? are these omni sensors good ? any comments

i may also be intrested in smart windows..mine already roll up,but id like one touch and vent, again what is the install like on that

thanks for any help...

Replies:

Posted By: nighthawk2k
Date Posted: July 04, 2003 at 8:08 AM

THe omni sensor is plug n' play. The omni sensor is one of the best sensors to have. Smart windows is not hard to do. Going to take some time to wire up. Shouldn't be a problem to do.

-------------
Tommy

-Clifford/Directed/Alpine-Audio & Security-
New York Installer posted_image

Posted By: gotoevolution
Date Posted: July 04, 2003 at 7:51 PM

You can also use the DEI module for windows up and down which also vents and has one touch the only difference is that with the DEI module you have to use up AUX on the alarm, with the smart windows, it adapts to the clifford alarm during programming and does not require you to use up any AUX

Print Page | Close Window