CRX window module

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15386
Printed Date: October 31, 2024 at 6:03 PM

Topic: CRX window module

Posted By: thebase
Subject: CRX window module
Date Posted: June 24, 2003 at 5:07 PM

Hi guys

I recently ftted a compustar 2wfm alarm and that works fine but now I wnat to hook it up to my windows does anyone have the wiring colours/diagrams it would be helpful . I tried to do it by gueesing but only manged to get drivers side to go up or passenger side but not together al from the drivers door. If I am doing it wrong please can someone advise me

Also how can I arm it so when i arm it the windows go up

thanks

-------------
There is only one life > The afterlife

Replies:

Posted By: SoundImage
Date Posted: June 24, 2003 at 10:27 PM

The best thing to do is to use a multi meter or a test light. the one that reads voltage when the switch is in the direction you want is the wire. if you have one touch you'll need to go straight to the driver door window motor to bypass the relay. to make them go up simply hook it to the armed output wire of the alarm usually orange. if you have a starter kill relay you may need to isolate with a diode. good luck

Print Page | Close Window