Print Page | Close Window

basics of a remote start?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1539
Printed Date: July 19, 2025 at 8:13 PM


Topic: basics of a remote start?

Posted By: babysm0ky
Subject: basics of a remote start?
Date Posted: June 27, 2002 at 4:13 PM

wat is the main wires i need to connect in order for the remote start to work?



-------------
sm0ky



Replies:

Posted By: mobiletoys2002
Date Posted: June 27, 2002 at 4:50 PM

1 your ignition wire

2your starter wire

3accesory wire

(the remote start will work without this but yor air conditioner and heat will not)

4power wire from the battery or ignition switch

5 tachometer wire (this wire lets the module or brain monitor engine staus )

brake input (this wire will shut down remote start when brake is aplied).

thats about it i mean these are the main wires that should be conected other than these you have a hood shutdown wire(this wire makes sure the car dont remote start while the hood is open) and a neutral safety switch wire( this wire will make sure the  car dont remote start in gear).anything else just ask be glad to help good luck




Posted By: Velocity Motors
Date Posted: June 27, 2002 at 11:00 PM

Don't forget about that important  GROUND wire ?? posted_image



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window