2000 durango?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15390
Printed Date: July 19, 2025 at 3:39 PM

Topic: 2000 durango?

Posted By: swartman
Subject: 2000 durango?
Date Posted: June 24, 2003 at 6:12 PM

i have a 2000 durango with a python 460HP alarm and am wondering if you could help me in figuring out the double pulse door unlock relay wiring?

the pwr lock wire and unlock wire are the same and there are also two wires that go to the lock and unlock motor. i am not sure which wires to use. the diagram i have says to use a 647 ohm resistor for arm/lock and a 1562 ohm resistor for disarm/unlock. i would greatly appreciate further guidance as to how to wire the relays....?

Replies:

Posted By: cool_greg
Date Posted: June 24, 2003 at 6:58 PM

both of the resistors are switched thru relays to one lock/unlock wire, not to sure if it is + or - switched maybe someone else can help out here. As for the two wires that go to the lock/unlock motor, no need to do any thing

-------------
Just a Guy, Wiring up those Vehicals
---------------------------------
Gool_Greg

Posted By: Bigkevin20
Date Posted: June 24, 2003 at 7:51 PM

I have the same truck and I am going threw the same thing.

You need two relays and one will have the 647 for lock and the other will have the 1562 for unlock. connect them both to the one wire that is your lock and unlock.

Posted By: Bigkevin20
Date Posted: June 24, 2003 at 7:51 PM

yo if you get your remote start to work with out the engine check light coming on please tellme what you did.

Posted By: chuck_tempe
Date Posted: June 24, 2003 at 8:01 PM

did you look at this?

https://www.the12volt.com/installbay/detail.asp?info=alarm&year=2000&make=Dodge&model=Durango&ID=17614&type=Alarm

Print Page | Close Window