Print Page | Close Window

Trigger Help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15448
Printed Date: April 20, 2024 at 3:40 AM


Topic: Trigger Help

Posted By: RichieRich
Subject: Trigger Help
Date Posted: June 25, 2003 at 6:13 PM

I am trying to install a window roll up module on my car, and can i only get a neg pulse when the alarm is armed.  My window roll up module requires a constant neg output to work.  Does anyone know of a fix?

Thanks

Richie




Replies:

Posted By: draasch
Date Posted: June 25, 2003 at 7:57 PM
what brand of alarm do you have????

does it have a trunk release???
if so are you using it??
if not you can use that wire for the windows. most alarms have a neg trunk release.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt




Posted By: Mr.Swifty
Date Posted: June 26, 2003 at 6:16 PM
RichieRich wrote:

I am trying to install a window roll up module on my car, and can i only get a neg pulse when the alarm is armed.  My window roll up module requires a constant neg output to work.  Does anyone know of a fix?

Thanks

Richie

Your alarm should have a negative when armed output, used for the ignition/starter kill relay. this will be a constant negative output.  you can use that to roll up your windows when you arm your car, but it will roll them up every time you arm the alarm.


Print Page | Close Window