interlock option for auxiliary channels

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15474
Printed Date: September 16, 2025 at 9:41 AM

Topic: interlock option for auxiliary channels

Posted By: 80085
Subject: interlock option for auxiliary channels
Date Posted: June 26, 2003 at 11:21 AM

for my concept 200, i have 3 auxiliary channels. the installer-programmable features chart shows that each of these channels can be programmed with interlock on or off. what does this mean?

Replies:

Posted By: Chris Luongo
Date Posted: June 26, 2003 at 4:58 PM

I haven't heard of that brand before, but most units don't allow those channels to work if you have the car running under your own control, with your own key. (They probably will work during remote start, though.)

You'll have to experiment, but I'll bet that turning the interlock off will allow the channels to work even with the engine running.

Posted By: 80085
Date Posted: June 26, 2003 at 6:04 PM

it's a clifford concept 200.

thanks chris, i'll try it out once i get the parts in for the trunk release

Print Page | Close Window