DEI 551T and Clifford concept 300

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15476
Printed Date: May 18, 2024 at 12:48 AM

Topic: DEI 551T and Clifford concept 300

Posted By: NiiAddy
Subject: DEI 551T and Clifford concept 300
Date Posted: June 26, 2003 at 11:54 AM

Hi Guys

I just got the DEI 551T remote valet to add to my Clifford Concept 300, any tips or things I should watch out for when installing it.

Cheers

Replies:

Posted By: nighthawk2k
Date Posted: June 26, 2003 at 7:50 PM

Make sure you shunt the shock sensor while the car is remote started.

-------------
Tommy

-Clifford/Directed/Alpine-Audio & Security-
New York Installer posted_image

Posted By: NiiAddy
Date Posted: June 30, 2003 at 4:32 AM

Sorry what you mean?

Posted By: profuse007
Date Posted: June 30, 2003 at 12:35 PM

use a relay to temporarily discon the sensor while rs, or else the alarm will go off.(assumin the horn is connected) i remember there was a 3rd ign wire, so use that wire for the sensor.
dont forget the ignition wire, this wire let your alarm not to know your rs in on. i wont go into detail

Print Page | Close Window