Compustar AS remote start with Preluber delay

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1559
Printed Date: July 26, 2025 at 1:25 AM

Topic: Compustar AS remote start with Preluber delay

Posted By: Ranger5.?
Subject: Compustar AS remote start with Preluber delay
Date Posted: June 28, 2002 at 9:25 AM

I have the compustar AS controller and I want to install the remote start on it. One problem, When I turn my key to the run position I need to leave it there for 30 sec while my preluber primes the engine. Is there a way to incorporate this into the Compustar system. The install manual leaves much to be desired in examples or even descriptions to explain if a wire is an input or output, at least with the AS controller guide. I could maybe do something with an accessory out?? Any info would be appreciated.

Thanks,

Carpy

Replies:

Posted By: Velocity Motors
Date Posted: June 28, 2002 at 1:20 PM

I'm not sure if the Compustar has this option available to delay the timing from ignition to crank. I know the Aladdin a-2000 has variable timing for such an option up to 20 seconds. Check with the manufacturer on this and see if they have a programming upgrade for this type of feature.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Ranger5.?
Date Posted: June 28, 2002 at 4:35 PM

Thanks for the info. Their manual is so vague and their email tech support is no gazelle. I haven't dug deep enough into the logic but I wonder if it would be possible to start the preluber by using an aux. output from the controller. If not I will try and get a hold of these guys.

Thanks again,

Carpy