scanner wire guage?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15671
Printed Date: July 21, 2025 at 12:01 PM

Topic: scanner wire guage?

Posted By: Insanez24kid
Subject: scanner wire guage?
Date Posted: June 30, 2003 at 4:25 PM

if you need to extend the length of the wires from an LED scanner can you just butt connect them to an 18 gauge wire or so? or is them another way to do it

-------------
Derek

Replies:

Posted By: xetmes
Date Posted: June 30, 2003 at 4:29 PM

those little things with a few leds in them? Yea 18 gauge is fine, 22 would probably be fine as well, they draw very little current

Posted By: sparkyssb
Date Posted: June 30, 2003 at 4:33 PM

I wouldn't worry a bit about the size or length of the wire. xetmes hit it on the head when he says that they don't draw anything. posted_image

Print Page | Close Window