viper 790xv remote start question
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15683
Printed Date: July 18, 2025 at 4:17 PM
Topic: viper 790xv remote start question
Posted By: tyler1613
Subject: viper 790xv remote start question
Date Posted: June 30, 2003 at 7:54 PM
alright...i installed the 790xv and it all works right...the only problem im having is when i shut down the car from being remotely started it pulses the factory disarm wire which turns on my dome lights and sents off the alarm...im thinking there must be a setting that I can change so that when the remotely startd car shuts down the factory disarms isnt pulsed..does anyone know how to fix this???
Replies:
Posted By: profuse007
Date Posted: June 30, 2003 at 8:40 PM
youre askin for settin, well you can program the unit not to lock control by ignition(default) to standard locks. but ive install one of this and it doesnt quite work like you mentioned. did you happen to use the rearm wire?
Posted By: CutDog504
Date Posted: July 01, 2003 at 10:53 AM
whats the year make and model of your car? Sounds like yer problem is in yer door trigger wire. Most newer cars the domelight has a delay function and you cant hook the door trigger to that, it needs to be hooked directly to the pinswitch. If you do that, and diode isolate it, you shouldnt get any voltage feedback if the domelight is turned on during remote start shutdown. So therefore, it will only go ff if a door isactually opened.
|