Autopage RS750 LCD and Maxima door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15714
Printed Date: July 07, 2025 at 1:50 PM

Topic: Autopage RS750 LCD and Maxima door locks

Posted By: maximadave
Subject: Autopage RS750 LCD and Maxima door locks
Date Posted: July 01, 2003 at 11:16 AM

All -

I am new to this forum (been lurking and reading). I have installed a lot of car audio adn video but have no alarm experience. My friend and I cannot figure out how to get the door locks wired properly on a 1997 Nissan Maxima with Factory Alarm. We wound up burning out a relay on the driver's side panel.

I have checked the diagrams here for door locks and tried several combinations from the installation manual but we are having no luck. I also checkd a Maxima enthusiasts web site and could not find a diagram or info to make this happen.

We have the remote start working properly, shock sensor, temp sensor etc.

Can someone please provide me with the info I need to complete this?

Thanks in advance!

Dave

Replies:

Posted By: cool_greg
Date Posted: July 01, 2003 at 6:28 PM

Door Lock Light GREEN/ Red(-) Driver's Door
Door Unlock GREEN/ YELLOW (-) Double Pulse Unlock

You will most likley have to use relays and I done one in a 90 maxima and had to use relays

-------------
Just a Guy, Wiring up those Vehicals
---------------------------------
Gool_Greg

Posted By: maximadave
Date Posted: July 02, 2003 at 12:01 PM

Talked to two installers - there is no need for a relay. Direct connection from the alarm to the door using the two wires. We were overcomplicating the install. Thanks for the reply.

BTW, this site is awesome, so much useful info.

Dave