Help Me Please

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15769
Printed Date: July 09, 2025 at 7:41 PM

Topic: Help Me Please

Posted By: youknownb
Subject: Help Me Please
Date Posted: July 02, 2003 at 1:33 AM

I am currently installing a compustar alarm with a power window module. The window module needs a ground when armend output and also needs to be hooked up with the ground when armed part of the starter kill relay. I cannot find another ground when armed output except for the one on the starter kill relay and if i hook up both wires it cancels out the module. Any Ideas on how to make it work.

Thanks
Nick

Replies:

Posted By: Manokat
Date Posted: July 02, 2003 at 6:17 AM

Diode isolate the starter kill and windows module input and connect them to "ground when armed output" of the alarm. Another solution is to add an extra relay for the window module.

Print Page | Close Window