2003 malibu Passlock2 or 3?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15771
Printed Date: July 12, 2025 at 3:11 PM

Topic: 2003 malibu Passlock2 or 3?

Posted By: Qveon
Subject: 2003 malibu Passlock2 or 3?
Date Posted: July 02, 2003 at 1:42 AM

Well? Anything else i should know about when doing a remote start on it? Doorlocks, is there factory security and does it still use a 1500ohm resistor? Thanks

Replies:

Posted By: mr12volt
Date Posted: July 02, 2003 at 6:14 PM

1500ohm resistor for what?

Posted By: NowYaKnow
Date Posted: July 03, 2003 at 3:53 PM

I really don't feel like looking this up so you probably should..But off the top of my head I'm thinking you need a 470 ohm resistor, and a 555L for the passlock 2..Other than that nothing real tricky..Trunk release is negative @ the switch I think I remember my info saying positive somewhere..

Posted By: Velocity Motors
Date Posted: July 03, 2003 at 9:41 PM

Lock requires a negative trigger, and unlock requires a negative trigger through a 1,500 ohm resistor. Must use relays. Must close doors to lock with a single pulse. It's a WHITE wire in the driver's kick panel.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window