1999 ford taurus wireing diagram

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15849
Printed Date: April 25, 2024 at 3:10 AM

Topic: 1999 ford taurus wireing diagram

Posted By: babysho
Subject: 1999 ford taurus wireing diagram
Date Posted: July 03, 2003 at 10:13 PM

Can anyone help? I recently purchased a add on alarm to my 1999 ford taurus. The alarm is oem from ford company. code alarm system 4 with the new pc-32 module which can be used with my existing remotes. I need a wiring diagram of my taurus se so that I could attemt installing it myself. My car did not come with the factory alarm just the remote keyless entery module/(RAP)module. If any one can help me obtain the wireing diagram or assit me with the installation It would be deeply appreicated. Thanks!!

-------------
ar

Replies:

Posted By: nighthawk2k
Date Posted: July 04, 2003 at 7:24 AM

Here You go!!!!!

12volts lt.grn/ppl or yellow   + ignition harness
Starter RED / lt. blue   + ignition harness
Ignition RED / lt. green   + ignition harness
Accessory gry/yel & RED / blk   + ignition harness
Second Accessory BLACK/ lt green   + ignition harness
Power Lock pink / YELLOW   - drivers kick panel
Power Unlock pink/green   - drivers kick panel
Parking Lights+ brown    switch or fuse box
Door Trigger BLACK/ lt. blue   + under dash light
Trunk/Hatch Pin BLACK/ pink   - at trunk light
Trunk/Hatch Release pnk/yel or gry/red    at release switch
Tachometer yellow/white    ignition coil
Brake Wire RED / lt. Green   + Brake switch or DKP
Horn Trigger PURPLE / orange   -

PATS Immobilizer bypass needed

-------------
Tommy

-Clifford/Directed/Alpine-Audio & Security-
New York Installer posted_image

Posted By: babysho
Date Posted: July 05, 2003 at 12:11 AM

Thanks!! Tommy I really appreciate time and help. Hate to be a bother but could you tell me what a pats immobilizer bypass is. Is that something that should of came with the alarm or something I need to purchase seperately.

-------------
ar

Posted By: Scott35
Date Posted: July 05, 2003 at 7:42 AM

If the add-on is not a remote start deal, I don't believe you need the pats immobilizer.

-------------
Tacomacrew

Posted By: babysho
Date Posted: July 05, 2003 at 8:00 AM

No It's not a remote start. thanks so much tacomacrew. I really appreicate the help.

Angel

-------------
ar

Posted By: nighthawk2k
Date Posted: July 06, 2003 at 12:32 PM

THE PATS Module is used for a remote start if you decided to add it on. If your doing an alarm system you don't need to use the pats bypass.

-------------
Tommy

-Clifford/Directed/Alpine-Audio & Security-
New York Installer posted_image

Posted By: babysho
Date Posted: July 06, 2003 at 8:48 PM

Thanks for the help I sure could use all the help I can get. I going to try to install it tommorow using the diagram you provided for me. I never install one before but I have install other things in my car.

-------------
ar