Door Sensor can’t pick up Passenger side
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15918
Printed Date: May 31, 2024 at 9:06 PM
Topic: Door Sensor can’t pick up Passenger side
Posted By: mmdb
Subject: Door Sensor can’t pick up Passenger side
Date Posted: July 06, 2003 at 12:11 AM
HI, I have the clifford rs3 responder in a 240sx '97 and i'm having trouble trying to have the passenger side door set off the door sensor. I did a check and the door is negative, but the wierd thing is when open AND close the door the connection remains negative. I think i'm doing something wrong.
I tried a combination of things but still can't get it to set off my alarm. Do i need to purchase a relay or some sort? I'm not understanding what's going on because the 12 volt detector i have (the light in the screwdriver kind) remains lit when i connect one side to the dome light. Very perplexed...
Any feedback will be great. Tahxn!
Replies:
Posted By: kidtransam
Date Posted: July 06, 2003 at 11:37 AM
What door trigger did you use? You should use the RED / white wire in the drivers kick panel.
-------------
With a torch and a big enough hammer...it WILL friggin fit!!
|