530T problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16052
Printed Date: November 03, 2025 at 9:04 PM
Topic: 530T problem
Posted By: dbsoundz
Subject: 530T problem
Date Posted: July 08, 2003 at 2:18 PM
I am having problems installing a 530T with a Viper 790XV. The car is a 1999 Lincoln Navigator. All the wires for the windows were connected at the drivers side switch, and whenever I press the up or down button on the switch, the windows only inch down or up. I have the orange wire from the 530T diode isolated to the ground when armed output, the RED / white wire of the 530T to the RED / white wire of the 790XV and the grey wire of the 530T to the light GREEN/ black wire of the 790XV. Any help would be greatly appreciated.
Replies:
Posted By: rick1234
Date Posted: July 08, 2003 at 2:23 PM
set toggles on 530 to higher setting for window strenth
Posted By: dbsoundz
Date Posted: July 08, 2003 at 2:43 PM
Should I set all 4 toggle switches to on?
Posted By: dbsoundz
Date Posted: July 08, 2003 at 5:12 PM
I tried the toggle switches to all the settings dei recommended, and still no luck. When I use the test light for power on the motor side of the wiring, it only shows positive for a little bit.
|