Print Page | Close Window

wiring diagram

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1618
Printed Date: May 12, 2025 at 7:21 AM


Topic: wiring diagram

Posted By: INTREPID
Subject: wiring diagram
Date Posted: June 30, 2002 at 3:00 PM

i need to know how to wire my horn to my alarm, so when my siren goes off my horn honks!

thanks,




Replies:

Posted By: caraudioshopbm
Date Posted: June 30, 2002 at 3:37 PM
what year is your car ????



Posted By: INTREPID
Date Posted: July 01, 2002 at 6:36 AM
ITS A 99 INTREPID!

-------------



Posted By: Velocity Motors
Date Posted: July 01, 2002 at 9:16 AM

The alarm you have has to have a HORN honk out put or a programmable siren output. If it does not have either, you can rig it up so that the parking light flash will activate the horn ( but then the horn honks everytime the lights flash ). If the alarm does have a horn honk relay built in, then attach the BLACK/ RED wire from the Intrepid along side all the other ignition wires by the steering column to the HORN honk wire on the alarm. If you do not have a built in relay for this you have to wire in a relay and make sure that the output of the horn honk wire is a (-) for this relay configuration:

  • Horn Honk wire from alarm connects to terminal 85 of a relay.
  • Connect terminal 86 to +12V Constant.
  • Connect terminal 87 to ground
  • Connect terminal 30 to the horn activation circuit.


-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window