how to: connect 2 led bulbs for car alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16343
Printed Date: April 24, 2024 at 12:51 PM

Topic: how to: connect 2 led bulbs for car alarm

Posted By: itnegrallmotor
Subject: how to: connect 2 led bulbs for car alarm
Date Posted: July 15, 2003 at 6:44 PM

How do i connect 2 led bulbs for the car alram warning light instead of one? Can i just directly tap both of them to the 12 volt negative and positive wire from the old LEd bulb? or do i have to use a resistor is there anyway i can get 2 led bulbs to light up without resistor? i have tried connecting 2 bulb to the old led wires but only one of them lights up. also they were two differnt led bulbs..would it work if i have gotten to of the same kind? please help me out !!!!

Replies:

Posted By: xetmes
Date Posted: July 15, 2003 at 7:31 PM

just hook them up in parrallel, it should be able to handle it its only around 50 mA

Posted By: Mr.Swifty
Date Posted: July 16, 2003 at 1:51 AM

if youre alarm wont handle 2 led's in parallel just wire them up in series.....you have 2 wires comming from the alarm one positive and one negative for the LED, lets just call them red and black...could be something different depends on the alarm

Red from alarm to red on LED, Black on LED to RED on other LED, BLACK on second LED to BLACK on alarm

Print Page | Close Window