Does anyone know or have the Wiring Diagram for Hyundai Sta Fe 2002 model? It has a factory fitted basic alarm and I wonder if it's possible to do some upgrade or add ons like Window Roll up and Passive Arming? This are the most important thing for me at the moment while I save some money for a good alarm..
If so, how do start or do that? Is is difficult? I don't know anything about car alarm, but I can learn if there's someone out there with a big heart who can help and specifically explain to me on How I should do it?
ANYONE ..........Plssssss .... 
-------------
My suggestion, read everything, all you can. All the stuff is on this site !
Hyundai Santa Fe 2002
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|red & orange |+ |ignition harness |
| STARTER|blue |+ |ignition harness |
| IGNITION|blue |+ |ignition harness |
| SECOND IGNITION|pink |+ |ignition harness |
| ACCESSORY|green |+ |ignition harness |
| POWER LOCK|yellow |- |DKP, white 22 pin plug |
| POWER UNLOCK|WHITE/ black |- |DKP, white 22 pin plug |
| LOCK MOTOR|gray | |DKP, white 22 pin plug |
| UNLOCK MOTOR|white | |DKP, white 22 pin plug |
| DISARM DEFEAT|no progressive unlck| | |
| PARKING LIGHTS +|GREEN/ orange | |fusebox, 15 pin plug |
| PARKING LIGHTS -|white | |headlight switch |
| HEADLIGHTS|gray/black |- |headlight switch |
| DOOR TRIGGER|yellow |- |fusebox, 8 pin plug |
| DOME SUPERVISION|use door trigger | | |
| TRUNK/HATCH PIN|BLACK/ orange |- |fusebox, 15 pin plug |
| HOOD PIN|pink |- |ETACS, 12 pin plug *1 |
| FCTRY ALARM ARM|factory remote only | | |
|FCTRY ALRM DISARM|factory remote only | | |
| DISARM NO UNLOCK|disarms w/rem. start| | |
| TACHOMETER|WHITE/ black or blue | |ECM *2 |
| SPEED SENSE|brown | |data link connector *3 |
| BRAKE WIRE|GREEN/ black |+ |brake pedal switch |
| HORN TRIGGER|brown |- |steering column |
| WIPERS|white (L), orange(H)|- |steering column |
| LF WINDOW UP/DN|blue - brown |A |driver window switch |
| RF WINDOW UP/DN|gray - yellow |A |driver kick panel |
| LR WINDOW UP/DN|red - white |A |driver kick panel |
| RR WINDOW UP/DN|orange - pink |A |driver kick panel |
| SUN RF OPN/CLOSE|yel/red - yel/red |A |sunroof relay in roof |
| RADIO 12V|red |+ |radio |
| RADIO GROUND|black |- |radio |
| RADIO SWITCH|yellow |+ |radio |
| RADIO ILLUMINATE|GREEN/ orange |+ |radio |
| LF SPEAKER|white - brown | |radio |
| RF SPEAKER|yellow - black | |radio |
| LR SPEAKER|red - blue | |radio |
| RR SPEAKER|green - orange | |radio |
Notes:
*1 The ETACS module is attached to the back of the fusebox on the bottom. The hood pin is also green at the switch under the hood. *2 The ECM is under the center console to the right of the gas pedal. On the 2.4L with A/T it is in the 26 pin plug, the 2.4L with M/T it is in the 12 pin plug, and the 2.7L it is in the 40 pin plug. *3 The data link connector is to the right of the fusebox.
-------------
than'x very much for the Wiring Diagram, I forgot to mentioned that it's a 2.7 ltr. but then again you already made it clear in the diagram, than'x again...
I still have to know if I if I can put some add ons or an upgrade to the Factory Fitted Alarm?
Is it possible?
-------------
Anything is possible !
__________________
I love
the12volt.com•
-------------
you can buy a factory alarm upgrade module that if you get a dei it will give you an extra channel to add remote start. second. the upgrade works off of your current factory remote when you press lock is arms and unlock disarm. but it only gives you one channel. to add something and it is designed for adding a remote start. but you better off getting a full fledged alarm remote start like a viper 550 or something. cuase that will give you lock unlock,. remote start and two channels for things like windows roll up or down.
-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.