Print Page | Close Window

door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16390
Printed Date: May 12, 2024 at 6:42 PM


Topic: door locks

Posted By: jurabals
Subject: door locks
Date Posted: July 17, 2003 at 1:36 PM

I need help in finding the wires between my door lock switch and the motor. can someone give me a diagram starting from the door wires in the kick panel through the door harness. Does the door wire start from the switch-->motor-->goes through the door harness or from the motor-->switch-->then through the door harness. I'm trying to install a second unlock pulse on my car so that the first push of the unlock button will only unlock the driver side and the second push will unlock all doors. Please help. Thank You.



Replies:

Posted By: djfearny2
Date Posted: July 17, 2003 at 4:08 PM
the way it works is switch motor and either just motor wires in the door or in most cases both. email me with car make and stuff and i will help you out.

-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.




Posted By: draasch
Date Posted: July 19, 2003 at 4:01 PM
what is the yr make and model of car??????????????????

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt






Print Page | Close Window