Remote start install
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16437
Printed Date: July 15, 2025 at 12:42 PM
Topic: Remote start install
Posted By: bpoppe4
Subject: Remote start install
Date Posted: July 18, 2003 at 6:24 PM
Hey, does anyone know what a starter sensing input is? The diagram says I have to wind it around a high voltage coil, I assume that is the ignition coil? Is there an easier way to do this? Also, how would I go about overriding the fact that I have to push the clutch in to start my manual car? Thank you for help in advance.
Replies:
Posted By: cool_greg
Date Posted: July 18, 2003 at 6:39 PM
it does help alot when you tell us what make/model of remote starter you are using as there and many, many different types, Also it helps to tell us what make/model/year vehical it is going into as there are also many, many different types, then maybe someone should be able to help you.
-------------
Just a Guy, Wiring up those Vehicals
---------------------------------
Gool_Greg
Posted By: Velocity Motors
Date Posted: July 18, 2003 at 11:20 PM
What you are looking for is the TACH or ALTERNATOR wire. Here is the information for the CLUTCH BYPASS------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|