Remote start Tach learning
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16448
Printed Date: July 17, 2025 at 3:57 AM
Topic: Remote start Tach learning
Posted By: Qveon
Subject: Remote start Tach learning
Date Posted: July 19, 2003 at 12:33 AM
How do i fix this:
I hook it all up and do the process for tach learning and it confirms that it has learned the tach, but when i hit the remote start button, it won't disengage the starter.
thanks.
Replies:
Posted By: catback
Date Posted: July 19, 2003 at 10:56 AM
you sure you have the right tach hook-up, sounds like the brain is getting the wrong tach feed or the brain is malfunctioning. Also check to make sure the brain is programmed to control the starter by monitoring rpm's and not by waiting so many seconds.
Posted By: Velocity Motors
Date Posted: July 19, 2003 at 2:08 PM
Tell us what year, make & model vehicle this is so we can see if you have the correct wire for TACH. Also, make sure that you have all your IGN wires hooked up.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: jrilla
Date Posted: July 21, 2003 at 6:44 AM
What brand and model remote starter is it you are working with?
-------------
J Rilla
Owner/Installer
Posted By: Qveon
Date Posted: July 22, 2003 at 12:04 AM
I am working with a Mannix 2 way and i am working on a 99 Honda Prelude. Blue wire on the pass. shock tower. 2 pin test conncector.
|