HEY VELOCITY!

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1650
Printed Date: May 13, 2025 at 3:52 AM

Topic: HEY VELOCITY!

Posted By: INTREPID
Subject: HEY VELOCITY!
Date Posted: July 01, 2002 at 5:08 PM

THE WIRING DIAGRAM THAT YOU GAVE ME FOR THE HORN HONK WILL THAT WORK IF I ADD A FLASHER TO MAKE MY HORN HONK WHY MY SIREN IS GOING OFF?

THANKS

Replies:

Posted By: Velocity Motors
Date Posted: July 01, 2002 at 5:22 PM

Give it a shot, but make sure you diode isolate the siren wire so no feedback signal can short the siren output of the alarm.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Velocity Motors
Date Posted: July 01, 2002 at 5:23 PM

BTW: If the siren output is a + output you will need to reverse the polarity of this wire to a ( - ) in order for the horn honk to work.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window