Print Page | Close Window

DEI 530t

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1656
Printed Date: May 03, 2024 at 5:56 PM


Topic: DEI 530t

Posted By: essey98
Subject: DEI 530t
Date Posted: July 02, 2002 at 5:22 AM

Does anyone know where I might be able to find a wiring diagram for the DEI 530t Window Automation Module?  I bought a used (i believe) one and it didn't come with the wiring information (and its not molded into the plastic casing like all the other DEI components.)  Thanks for your help!



Replies:

Posted By: GlassWolf
Date Posted: July 03, 2002 at 2:52 PM
what are the wire colors, in order?
is this a 2-window, 1-direction module?
thanks


-------------
-GlassWolf
Pioneer Stage-4, Orion, DynAudio, Fi




Posted By: Big Dog
Date Posted: July 04, 2002 at 2:38 PM

Hey  essey98,

Here's what y'all need!

The 530 T does two windows up and down.

There are two harnesses, an eight pin and a seven pin.

On the eight pin harness with the heavy gauge wires:

Violet = Ground path of motor # 1

Green = Down, motor #1

Blue = Up motor #1

Red = + 12V fused

Black = Ground

Violet/Black = Ground path motor #2

GREEN/ Black = Down motor #2

Blue/Black = Up motor #2

The seven pin harness with the light gauge wires:

Brown = Up switch #1

White = Down switch #1

RED / White = Negative trigger input for window venting

Orange = Negative ground when armed input

Gray = Neg out during activation

BROWN / Black = Up switch #2

WHITE/ Black = Down switch #2

Enjoy!  posted_image



-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.




Posted By: woffordk
Date Posted: July 06, 2002 at 11:48 AM

Can anybody tell me please what the DIP switches do. I need a diagram for them please.

-Thanks





Posted By: Jamchan
Date Posted: November 24, 2002 at 2:05 PM

The first four dip switches control the amount of force needed to operate your windows (1&2 driver side, 2&4 pass side). Some motors require more force some require less.

Factory: off on off on

Low: on on on on

Med: on off on off

Hi: off off off off



-------------
Jamchan




Posted By: ibcomputergeek
Date Posted: November 26, 2002 at 10:55 AM

Hey I just joined and all I have to say is thanks.  I was bummed out when I couldnt find the manual for the 530T on DEI's website, but you guys rock. 

Thanks,

Ibcomputergeek



-------------
Richard A. Cook Jr.





Print Page | Close Window