Need some help with wheel chair lift?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16571
Printed Date: July 16, 2025 at 8:44 AM
Topic: Need some help with wheel chair lift?
Posted By: diabloed
Subject: Need some help with wheel chair lift?
Date Posted: July 22, 2003 at 11:49 AM
i have a customer that wants a Avital 3200 installed on her van! she has a wheel chair lift that she wants to be able to control via remote! just wondering if anyone has done this before? any ideas?
Replies:
Posted By: anonymous
Date Posted: July 22, 2003 at 5:41 PM
I have had the joy of fixing/reinstalling an couple of RCSs in handicapped vans with controls for door lifts etc. My best advice is to get in contact with the installer of the lift to get schematics for them. Every one that I have worked on did have low level -ve or +ve inputs it's just a matter of knowing what goes where. The other thing to keep in mind is some units will need 3 or 4 channels, 1 to open the door 1 to make the lift come out another for lift up and then if there's keyless entry one for those. But first of all see if you can get in touch with the lift installer. If you can hook up with him they are a very good source of income, especially if you can install your stuff before the handicap gear goes in.
Happy metering
Anonymous
|