Print Page | Close Window

01 Jeep Grand Cerokee rear window rollup?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16592
Printed Date: July 07, 2025 at 10:44 PM


Topic: 01 Jeep Grand Cerokee rear window rollup?

Posted By: brivalen
Subject: 01 Jeep Grand Cerokee rear window rollup?
Date Posted: July 22, 2003 at 8:14 PM

I have the crimeshopper 4 windows rollup module and can get the front 2 windows to roll up but nothing i do will allow the rear windows to roll up. I think this is in part because the rear windows are controlled over the PCM (jeep computer) unless they are being rolled up by their respective door. I have tried everything - any help is appreciated.

Brian




Replies:

Posted By: Fullthrottle
Date Posted: July 23, 2003 at 10:37 AM
Try wiring the roll up AFTER the Jeep module. That should do it. You might have to run longer stretches of wire to each door.




Posted By: brivalen
Date Posted: July 23, 2003 at 8:35 PM

nope - that doesnt work either - no matter what config ive done nothing works - I have installed several remote starts/alarms/stereos and am familiar with the wiring but still nothing - im wondering if somehow the module isnt working right but still send voltage out

brian





Posted By: Fullthrottle
Date Posted: July 24, 2003 at 11:29 AM
Brian,

I would use a meter to check to see if the back door leads are in fact getting their respective voltage to operate the windows. If not..I would guess the module is bad. Other then that Im stumped! Sorry man!




Posted By: JWorm
Date Posted: July 24, 2003 at 9:24 PM
I tried doing the same thing a couple months ago, Could never get it to work, Almost had it but every time you started the jeep, it would roll down a rear window (sometimes both) an inch or even all the way. Very weird system. After a while I just put it back to factory. Front windows were easy.





Print Page | Close Window