Print Page | Close Window

95 Jeep Grand alarm wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16625
Printed Date: July 06, 2025 at 11:51 PM


Topic: 95 Jeep Grand alarm wiring

Posted By: 2bmodded
Subject: 95 Jeep Grand alarm wiring
Date Posted: July 23, 2003 at 6:02 PM

  I have a 95 JGC with a factory alarm, but it does'nt have a led indicator.  I purchased a led scanner to solve this.  I was told that with my keyless entry I just need to connect to the doorlock wire that is 12volt when unlock and grounded when lock.  I checked the diagrams at this site, but no luck.  Any help of any wire that meets this requirement  is appreciated.  Thanks in advanced.  



Replies:

Posted By: draasch
Date Posted: July 23, 2003 at 9:59 PM
Make:   Jeep
Model: Grand Cherokee
Year:    1993-95
This Database Was Last Updated On:    6/9/03
Index #: 8963


Alarm
Constant 12 volts RED / WHITE FUSED AT 40 AMP AND PINK/BLACK FUSED AT 60 AMP
Ignition 12 volts DARK BLUE/GRAY IGNITION SWITCH HARNESS
Starter YELLOW/DARK BLUE IGNITION SWITCH HARNESS
Dome Light YELLOW (-) DRIVER KICK PANEL OR COURTESY LIGHT
Trunk Pin Switch GRAY/BLACK (-) LIFTGATE PIN SWITCH *
Parking Lamp DARK BLUE/RED (+) HEADLIGHT SWITCH OR AT FUSE BOX
Power Lock ORANGE / VIOLET DRIVER KICK #202
Power Unlock PINK/VIOLET PANEL

* 1993 GRAY (-) At Liftgate Switch, VIOLET / YELLOW (-) At Light. YELLOW (-) Door Trigger Should Cover Rear Hatch On All. #202- See Positive Pulse Door Lock Diagram.


-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt





Print Page | Close Window