remote start on a standard
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16729
Printed Date: July 07, 2025 at 4:49 PM
Topic: remote start on a standard
Posted By: bdog
Subject: remote start on a standard
Date Posted: July 26, 2003 at 8:10 PM
I know most people would not do this on an install for someone else because of liability issues but I have it wired up on my truck. I still have the clutch safety switch wired in so it will not start without pressing the clutch but I have tested the remote start holding the clutch in and it works. My question is what if any safety measures could be installed to go along with this setup? I am pretty sure I can rember to leave it in neutral and engage the emergeny brake but I am worried about what if. I can just imagine hitting my remote start one morning and then walking outside and seeing my truck in the neighbors living room.
Replies:
Posted By: bdog
Date Posted: July 26, 2003 at 9:58 PM
Nevermind. I tried searching and found a wealth of information. Should have thought of that before I posted.
|