Factory Alarm need removed

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16806
Printed Date: July 15, 2025 at 12:45 PM

Topic: Factory Alarm need removed

Posted By: Donna51058
Subject: Factory Alarm need removed
Date Posted: July 28, 2003 at 8:47 PM

1999 Toyota tacoma prerunner we want to undo the factory alarm due to key was lost and hubby replaced battery and I wasone with only key that worked but my key failed to work at forst to turn off lights and horn flashing.. Anyone know how to turn off alarm permently but that we can still start pickup?

Email me at: Donnab_58@hotmail.com

Replies:

Posted By: Basscoholic23
Date Posted: July 29, 2003 at 12:24 AM

All I know is that the tacoma doesnt have an OEM alarm present in the schematics. But if it did it probably was an aftermarket one. And to bypass it is pretty simple, just disconnect the Starter kill (usually under the dash) disconnect the relay and reconnect your cut starter wire (most likely a Black color wire) And just disconnect the alarm brain usually up high in the dash.

Hopefully this helps posted_image

Posted By: tv4free
Date Posted: July 29, 2003 at 12:33 AM

you need to use the key in the door. I dont remember if it is pass. door or drivers door.lock and unlock the door, if it has a factory alarm.now if it is TDD i think that is what they called its still factory but plugs in after market like.if it is this it looks like the old audiovox aps-15. then unplug

Print Page | Close Window