I am going to be doing a 1997 Ford Econoline later this week and will need the wiring diagram for this vehicle if anyone can provide it.
Thanks,
Jeremy
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|yellow |+ |ignition harness |
| STARTER|WHITE/ pink |+ |ignition harness |
| IGNITION|RED / green |+ |ignition harness |
| SECOND IGNITION| | | |
| ACCESSORY|gray / YELLOW |+ |ignition harness |
| POWER LOCK|red *1 |5wi|either kick *1 |
| POWER UNLOCK|brown *1 |5wi|either kick *1 |
| PARKING LIGHTS +|brown | |buzzer or rear harness |
| HEADLIGHTS| | | |
| DOOR TRIGGER|BLACK/ lt. blue |+ |pin or courtesy light |
| TRUNK/HATCH PIN|common with doors | |with factory pin only |
| HOOD PIN| | | |
| FCTRY ALARM ARM|RED / yellow *3 |+ |theft module *2 |
|FCTRY ALRM DISARM|dk. GREEN/ purple |- |theft module or dkp |
| TACHOMETER|WHITE/ pink | |'CTO test' connector *4 |
| BRAKE WIRE|green |+ |at brake pedal switch |
| HORN TRIGGER|dk. blue |+ |horn relay under dash |
| WIPERS| | | |
| LF WINDOW UP/DN| | | |
| RF WINDOW UP/DN| | | |
Notes:
*1 Use passenger switch to test wires. If vehicle has keyless entry, small gauge pink / YELLOW and pink/green will work with positive pulse. *2 Anti-theft module located behind drivers side 'B' pillar. *3 Must pulse the RED / yellow (+) while locking. The RED / yellow can also be found at either pin switch. *4 Test connector is located by itself, labled 'CTO test' above brake booster on the drivers side of engine compartment.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Thanks Jeff, we can always rely on you for the best of help
