need help with viper 300esp
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16824
Printed Date: July 16, 2025 at 7:34 AM
Topic: need help with viper 300esp
Posted By: bbaddbrad
Subject: need help with viper 300esp
Date Posted: July 29, 2003 at 6:02 AM
i have a 2000 impala and am installing a viper system .I have all installed (i think)except the door locks .Can someone let me know what wires are lock and unlock feed wires i cant find them anywhere??????I found a orange with black tracer wire that when i ground unlocks the doors but i cant find the wire to lock the dorrs .HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
-------------
bbaddbrad
Replies:
Posted By: profuse007
Date Posted: July 29, 2003 at 12:09 PM
| POWER LOCK|ORANGE / black |*2 |gray 24-pin plug @ BCM *3 |
| POWER UNLOCK|same wire as lock |- |gray 24-pin plug @ BCM *3 |
| PARKING LIGHTS -|white *8 | |pink 24-pin plug @ BCM *3 |
*3 The BCM is located above the brake pedal. It is a plastic box with three plugs that face the firewall.
*8 Must isolate this wire from the BCM when doing remote start to avoid 'service engine soon' light. See directfax document #1600 for wiring information.
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: bbaddbrad
Date Posted: July 29, 2003 at 8:22 PM
thank you. i had put a 490 ohm resistor in the green wire of the alarm to the orange w/blk traced wire and my doors lock but now when i also hook up the blue wire of alarm up to the same orange wire nothin .it is backfeeding and i dont know how to stop it?????
-------------
bbaddbrad
|