I need a wire chart for this car and can someone please tell me what kind of door locks this has and do I need a bypass for doing a remote start
Bypass module required for the 2001 CRV
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|white |+ |ignition harness |
| STARTER|BLACK/ white |+ |ignition harness |
| IGNITION|BLACK / YELLOW |+ |ignition harness |
| ACCESSORY|yellow |+ |ignition harness |
| SECOND ACCESSORY|WHITE/ black |+ |ignition harness |
| POWER LOCK|GREEN / WHITE *2 |- |driver door harness *3 |
| POWER UNLOCK|GREEN/ orange *2 |- |driver door harness *3 |
| LOCK MOTOR|WHITE/ red | |drivers kick panel |
| UNLOCK MOTOR|blue/red | |drivers kick panel |
| DISARM DEFEAT|yellow/red | |passengers kick panel |
| PARKING LIGHTS +|RED / black | |dash dimmer |
| PARKING LIGHTS -|blue/red | |*6 |
| HEADLIGHTS|RED / white |+ |headlight switch |
| DOOR TRIGGER|lt. GREEN/ red |- |drivers kick *3 |
| DOME SUPERVISION|comes on with unlock| | |
| TRUNK/HATCH PIN|blue/black |- |drivers kick *3 |
| HOOD PIN|yellow/red or yellow|- |hood switch *3 |
|TRNK/HTCH RELEASE|yellow |+ |release switch |
| TACHOMETER|blue | |test connector *1 |
| SPEED SENSE|blue/white | |instrument cluster or PCM *7|
| BRAKE WIRE|GREEN / WHITE |+ |cruise control *5 |
| HORN TRIGGER|gray *4 |- |drivers kick |
| WIPERS|blue(L), blu/yel(H) |- |steering column |
| LF WINDOW UP/DN|RED / blu - RED / yel |A |power window switch |
| RF WINDOW UP/DN|blu/yel - blu/orn |A |power window switch |
| LR WINDOW UP/DN|grn/yel - green |A |power window switch |
| RR WINDOW UP/DN|yellow - yel/grn |A |power window switch |
Notes:
*1 Found at the 2-pin tach test connector on the drivers side of the firewall. *2 Must use relays to trigger the lock and unlock wires. *3 Also found at the green factory alarm plug located in the drivers kick panel. *4 May also use blue/green at the steering column, negative trigger. *5 The cruise control module is located in the drivers kick panel. *6 This wire only works if there is a factory alarm installed. It is at the green factory alarm plug in the drivers kick. *7 The PCM is in the passenger kick panel. VSS is in the 31 pin plug, pin 23.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
no bypass needed for remote start and you have a negative system that needs a high current ground, must use relays easy car.
-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.