95 mitsubishi eclipse gst factory alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=17054
Printed Date: July 07, 2025 at 5:15 PM

Topic: 95 mitsubishi eclipse gst factory alarm

Posted By: dookie30
Subject: 95 mitsubishi eclipse gst factory alarm
Date Posted: August 02, 2003 at 12:40 PM

I had a python 880xp alarm installed and sometimes when I disarm it and open the drivers door the factory alarm goes off. The installer hooked the new alarm disarm to the door locks. Is there a way to fix this or disconnect the factory alarm? Thanks.

Replies:

Posted By: draasch
Date Posted: August 02, 2003 at 2:15 PM

OEM Alarm Disarm GREEN / WHITE (-) DRIVER KICK PANEL.

you can t-off the unlock wire and t-tap into the above wire. that should disarm the factory alarm

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: dookie30
Date Posted: August 02, 2003 at 2:54 PM

Thanks

Print Page | Close Window