Print Page | Close Window

advantguard 4 tach programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=17082
Printed Date: July 12, 2025 at 7:55 PM


Topic: advantguard 4 tach programming

Posted By: ryanambrose
Subject: advantguard 4 tach programming
Date Posted: August 03, 2003 at 8:08 AM

I can't get the tach from my '02 Chevy 2500 to program to my advantguard 4.  There is no programming option in the feature chart in the manual.  If anyone knows the column and row to program it, or if there is another way please tell me.

Thanks




Replies:

Posted By: wikkedkustoms
Date Posted: August 03, 2003 at 12:31 PM
It is an installer programmable feature only. What you have to do is this. Start the vehicle and let it idle. Enter your valet code on the switch (factory setting is press star twice and then blank. After doing this hold down the star button, after about 5 seconds the siren will chirp, continue to hold it until it chirps again which will be about 15 seconds. After it chirps release it. Then press the blank side and release wait for a chirp (this is very important) after you hear that confirmation chirp press the star side five times the siren will chirp each time to help you count. After the fifth time listen for the siren to chirp twice and the lights to flash twice. And now you're all set just turn the car off and enjoy autostart.



Posted By: elrayodesinaloa
Date Posted: August 04, 2003 at 6:32 PM
right, and if don't you've got a wrong tach wire.

-------------


Print Page | Close Window