Print Page | Close Window

Central locking disabled by alarm?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=17281
Printed Date: July 12, 2025 at 7:57 PM


Topic: Central locking disabled by alarm?

Posted By: ewpurdy
Subject: Central locking disabled by alarm?
Date Posted: August 07, 2003 at 11:30 AM

I have a Commando 2 door central locking system installed and working fine. 

When I connect the lock/unlock outputs of my alarm to the inputs on the central locking module, the central locking stops working.  I can lock or unlock both doors with the alarm but cannot lock one door with the other.  Furthermore, if the 2 locks are in opposite positions, then the alarm won't lock or unlock the doors at all.  Is this normal? 

Does a 5 wire actuator act just like a 2 wire actuator if you ground the other 3 leads?

Thanks for the help.




Replies:

Posted By: elrayodesinaloa
Date Posted: August 07, 2003 at 6:46 PM

diode isolate them see what happens.



-------------


Print Page | Close Window