I am installing a PF 50 (CODE ALARM )unit in a 95 Taurus and need the programing info . I can not get the starter to work and at attempt get two flashes from lights but no kick to starter , also why no LED on at lock and is there a starter bypas. Please HELP me
-------------
Ed Mak
hey ed i really dont have alot of info by what you gave but ill try to give you something...... as far as the bypass there is no anti-theft on that year unless it was put on at a later date........
|
| 12 VOLTS CONTANT | (5) YEL | IGNITION HARNESS |
| IGNITION 1 | RED / LT GRN | IGNITION HARNESS |
| IGNITION 2 | N/A |
| IGNITION 3 | N/A |
| ACCESSORY /HEATER BLOWER 1 | GRY/YEL | IGNITION HARNESS |
| ACCESSORY /HEATER BLOWER 2 | BLK/GRN | IGNITION SWITCH HARNESS |
| STARTER | WHT/PNK | IGNITION HARNESS |
| PARKING LIGHTS | BRN(+) | @HEAD LGT SWITCH |
| DOMELIGHT | BLK/LT BLU(+) | DRV KICK PANEL |
| PWR DOOR LOCK | PNK/YEL | DRV KICK PANEL |
| PWR DOOR UNLOCK | PNK/LT GRN | IF FACT KEYLESS TYPE B W/O FACT KEYLESS TYPE C |
| TRUNK RELEASE | PURP/YEL (+) | AT KEYLESS MOD (SEDAN) |
| TACH SENSOR | TAN/YEL | IGNITION HARNESS |
BRAKE | RED / LT GRN(+) | SWITCH ON BRACKET ABOVE BRAKE PEDAL |
HORN | YEL/LT GRN(-) | IN STEERING COL |
FACTORY DISARM | N/A |
also check with the wires from the alarm you might have just wired something backwards... thats really all i can do with the info you gave... if it dont work be more specific what wires did you hook up where....also did you hook up the tach wire if its a hard starting car you will have to do this