explorer door lock help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=17313
Printed Date: May 29, 2024 at 3:42 AM

Topic: explorer door lock help

Posted By: Darksyde
Subject: explorer door lock help
Date Posted: August 07, 2003 at 9:28 PM

I can't get the door locks to work in my 2000 explorer they unlock but they won't lock I have never been stumped before can anyone help me please. wiring diagrams or any thing else would be a great help.

Replies:

Posted By: SIsensee
Date Posted: August 08, 2003 at 3:37 AM

pink with yellow and pink with green make sure you are probbing wires that are the same gauge that could through you off

Posted By: draasch
Date Posted: August 08, 2003 at 2:30 PM

do you have a factory keyless entry sysem in the truck?????? if so then you have a neg system for your door locks...... if you found the unlock, then you should be able to find the lock wire. they are together in the same area.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: gpforet
Date Posted: August 12, 2003 at 8:16 AM

I have a 99 explorere and got to the lock/unlock (pink with yellow and pink with green) in the harness located under the carpet near the driver's side door/kick panel. I used negative trigger and .7 sec pulse length. Seems to work fine.

-------------
gpforet

Posted By: gpforet
Date Posted: August 12, 2003 at 8:19 AM

Ohh, and MAKE SURE you have a good ground at the alarm.. Mine would not work when I first installed it and found that I have neglected to connect the ground at the alarm.

-------------
gpforet

Print Page | Close Window