Avant Guard 4 lock wires?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=17348
Printed Date: April 29, 2024 at 1:26 PM

Topic: Avant Guard 4 lock wires?

Posted By: Rams Z
Subject: Avant Guard 4 lock wires?
Date Posted: August 08, 2003 at 1:30 PM

I have the wire Diagram for the Avant Guard 4, but when it comes to the power door locks section it says: "See Door Lock/Unlock section of this manual"

I must not have the whole manual, because door locks are never discussed in the 24 pages I have.

I don't understand what they wires mean:

WHITE/ Green (door lock comm) ????

Gray/Orange (door unlock n.c.) what does n.c. mean??????

Gray/Green (door lock n.c.) n.c. ????????

WHITE/ orange (Door unlock comm) ?????

RED / Green (door lock n.o.) n.o. ??????

RED / orange (door unlock n.o.) n.o. ???????

I tested all these wires and I don't get ground from any of these wires, should I? Any and all help would be very appreciated... Please help... I desparatly want to put my car back together. The locks are aftermarket spals and rest at neg. I bought them from the link at the top of this page from Comando Alarms.

Thank you

Ramsey Boyd

Replies:

Posted By: Velocity Motors
Date Posted: August 08, 2003 at 1:45 PM

WHITE/ Green (door lock comm) ????

Goes to your LOCK wire on vehicle

Gray/Orange (door unlock n.c.) what does n.c. mean??????

NOT USED

Gray/Green (door lock n.c.) n.c. ????????

NOT USED

WHITE/ orange (Door unlock comm) ?????

Goes to your UNLOCK wire on the vehicle

RED / Green (door lock n.o.) n.o. ??????

This is your polarity selector on the system. If you have a (+) system add 12 volt constant to this wire. If you have a (-) type system, ground this wire

RED / orange (door unlock n.o.) n.o. ???????

This is your polarity selector on the system. If you have a (+) system add 12 volt constant to this wire. If you have a (-) type system, ground this wire

All these wires are for the internal relay in the CPU. This is very helpful to installer's because it reduces the need to wire in outboard relays for the locking systems.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Rams Z
Date Posted: August 08, 2003 at 1:48 PM

I love you forever and ever.... Tell me where to send my wife to repay you. posted_image

Posted By: Himself
Date Posted: August 08, 2003 at 1:54 PM

wow

-------------
What?

Posted By: Velocity Motors
Date Posted: August 08, 2003 at 2:19 PM

Sorry, we only take credit card & money order's. Human sacrifices and animal bartering are not accepted ( yet ) posted_image .

Nop problemo and good luck.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA